Product
Shandong Zhenxing Trailer Is a collection of research and development, production, sales in one of the comprehensive enterprise
National unified information hotline:13625479388
Our advantages

Years of quality assurance · Focus makes us more professional

  • 01
  • Perfect after-sales service system

    We have a complete after-sales service network, providing customers with a full range of services from pre-sales to after-sales, helping customers get the most satisfactory products. To ensure that customers can easily and timely solve the problems encountered during the use of the product.

  • 02
  • Products are sold at home and abroad

    In recent years, the foreign trade department of the company has actively developed the international market, and some products have been exported to India, South Africa, Russia, Ukraine and other countries and regions, winning the praise and trust of customers, and established long-term cooperative relations with them.

  • 03
  • The company is strong

    Shandong Liangshan Boxing Industrial Park covers an area of ​​over 49,000 square meters, with a construction area of ​​over 24,000 square meters. The company has a registered capital of 20.5 million yuan and total assets of more than 60 million yuan.

  • 04
  • Internationally leading scientific research strength

    We have all kinds of large-scale professional equipment and advanced production technology, professional product testing line and complete computer-aided design system. The products have obtained the national 3C compulsory production certification and IS09001 international quality system certification, and won the "National Special Vehicle Quality Stable and Qualified Enterprise" in 2005.

    about us
    Shandong Zhenxing Trailer Co., Ltd.

    Shandong Zhenxing Trailer Co., Ltd. is located in the Special Purpose Vehicle Industrial Park of Quanpu Town, Liangshan, Shuibo. It is an automobile manufacturer and a national high-tech enterprise with national announcement management. It always puts product quality first and has established a complete set of quality assurance. System, the most advanced intelligent robot automatic production line, so that product quality and product quality have risen to a new level. The company covers an area of ​​more than 300 acres, with a production building area of ​about 130,000 square meters. It has various semi-trailer production equipment and product testing equipment of 200 More sets (sets).

    Shandong Zhenxing Trailer Co., Ltd. specializes in the production of various types of semi-trailers (skeleton type, wing type, rear tipping type, rear tipping box type, fence type ...

    MORE>>
    Hot products
    60 ton U-shaped rear dump trailer

    60 ton U-shaped rear dump trailer

    3-axle U-shaped rear dump trailer

    3-axle U-shaped rear dump trailer

    3-axle U-shaped rear dump trailer

    3-axle U-shaped rear dump trailer

    3-axle U-shaped rear dump trailer

    3-axle U-shaped rear dump trailer

    Cargo Semi Trailer

    Cargo Semi Trailer

    Cargo Semi Trailer

    Cargo Semi Trailer

    Warehouse Trailer

    Warehouse Trailer

    Low Bed Semi Trailer

    Low Bed Semi Trailer

    news information
    Lowflatsemi-traile...2022-04-19
    Low flat semi - trailer oblique direction is what is going on. Low flat semi trailer is a kind of commonly used semi trailer, its use is very common, and the effect is good, but low flat semi trailer driving also need to pay attention to a lot of problems, the following is about low flat semi trailer oblique direction is what is going on.
    1, the vehicle skew is mainly because the distance between the traction pin center and the corresponding points on both sides of the first axle is not equal (three points are not isosceles triangle), if out of tolerance may cause abnormal tire wear (zigzag phenomenon).
    2. Detection and adjustment method
    1) Park the vehicle on a level road surface without braking.
    2) Take points on the inner surface of the front wheel hub of the front axle, and take points on the left and right sides with symmetrical positions.
    3) Take the traction pin center as the benchmark, measure the distance to the above two points, the requirement is "l1-L2I 3mm. If out of tolerance, adjust the front axle live pull rod until it meets the deviation requirement.
    4) Before measurement, check the measured value at corresponding points of rear axle hub, requiring 2mm of old 181-821. If it is out of tolerance, adjust the rear shaft pull rod to make the front and rear shafts parallel until the deviation meets the requirements.
    5) Tighten the fastening bolts on the front and rear drawrods.
    6) After adjustment, drive about one kilometer and stop in place without braking, and check the above dimensions. If there is no change, the adjustment will be successful.
    7) The adjustment process should make the pull rod in working state, that is, a rotation of the pull rod, the bearing of the car, the adjustment of the pull rod is normal.
    ...

    【MORE】

  • > Low flat semi - trailer oblique direction is what is going o2022-04-19
  • > The wrong way of semi - trailer maintenance.2022-04-19
  • Lowflatsemi-traile...2022-04-19
    Low flat semi - trailer oblique direction is what is going on. Low flat semi trailer is a kind of commonly used semi trailer, its use is very common, and the effect is good, but low flat semi trailer driving also need to pay attention to a lot of problems, the following is about low flat semi trailer oblique direction is what is going on.
    1, the vehicle skew is mainly because the distance between the traction pin center and the corresponding points on both sides of the first axle is not equal (three points are not isosceles triangle), if out of tolerance may cause abnormal tire wear (zigzag phenomenon).
    2. Detection and adjustment method
    1) Park the vehicle on a level road surface without braking.
    2) Take points on the inner surface of the front wheel hub of the front axle, and take points on the left and right sides with symmetrical positions.
    3) Take the traction pin center as the benchmark, measure the distance to the above two points, the requirement is "l1-L2I 3mm. If out of tolerance, adjust the front axle live pull rod until it meets the deviation requirement.
    4) Before measurement, check the measured value at corresponding points of rear axle hub, requiring 2mm of old 181-821. If it is out of tolerance, adjust the rear shaft pull rod to make the front and rear shafts parallel until the deviation meets the requirements.
    5) Tighten the fastening bolts on the front and rear drawrods.
    6) After adjustment, drive about one kilometer and stop in place without braking, and check the above dimensions. If there is no change, the adjustment will be successful.
    7) The adjustment process should make the pull rod in working state, that is, a rotation of the pull rod, the bearing of the car, the adjustment of the pull rod is normal.
    ...

    【MORE】

    Home About us Product Center Corporate Culture Product advantages News Center Contact us
    Shandong Zhenxing Trailer Co., Ltd.
    NAME - SAI TUN LYNN
    WECHAT-TL2273025354 / 13625479388
    PHONE-09 788884666 / 09 441866669
    ADRESS-MANDALAY MYANMAR
    We sincerely welcome new and old customers to visit and purchase
    copyright Shandong Zhenxing Trailer Co., Ltd.
    Technical support: